Pins

A plumber in Delta, Pennsylvania replaced a leaking flex hose on a 50-gallon power vent water heater with copper piping, new fittings, and coupling. They disassembled the burner assembly, dried it, and successfully re-lit the unit to restore hot water service.

A plumbing team in Baltimore, Maryland assessed damaged kitchen drain lines located in a crawlspace. They identified mold and insulation that must be removed before work can begin. The planned repair includes replacing five feet of 2-inch pipe, three feet of 1½-inch pipe, and installing a new wye fitting.

A plumber in Bel Air, Maryland replaced the flapper in a Kohler hall bathroom toilet. The service included system restoration along with performance and safety testing to ensure proper function.

A plumber in Bel Air, Maryland diagnosed a septic system failure causing sewage to back up in the backyard. The inspection confirmed that the problem stemmed from a malfunction in the septic system, requiring further repair to prevent ongoing drainage issues.

THE PLUMBER GUYS inspected three exterior storm drains measuring 6–10 inches around a commercial building in Bel Air, Maryland. The team performed an exterior waste system rejuvenation, applied a basic system treatment, and conducted performance and safety testing to verify functionality and compliance.

A plumber in Aberdeen, Maryland connected a new ice maker supply line from the valve to the refrigerator. They purged air from the line and confirmed water flowed at the dispenser. The technician checked all connections for leaks to ensure proper function.

A plumber in Bel Air, Maryland installed a customer-supplied Moen kitchen faucet and tested it to ensure proper function. The service focused on secure installation and operational checks for kitchen plumbing.

A plumber in Bel Air, Maryland replaced a faulty pressure reducing valve and repaired a leaking garden faucet. This service improved water pressure regulation and fixed an outdoor plumbing issue, ensuring proper function and preventing further water loss.

A plumber in Bel Air, Maryland replaced a leaking angle stop and faulty supply line in a hall bathroom toilet. The technician removed the worn 3/8” IPS angle stop and installed a new valve and supply line to restore proper water flow and prevent leaks.

A plumber in Baltimore, Maryland inspected a kitchen sink sprayer with a faulty nozzle leaking through the push button and causing noise. The homeowner chose to replace the sprayer independently. No other plumbing issues were found during the visit.

A plumber cleared a clogged bathtub drain in Baltimore, Maryland. The blockage included hair, a handle cap, a LEGO piece, and a razor shield. The drain now flows at full capacity.

The Plumber Guys replaced a 12-inch HP InSinkErator, detected a water leak, and completed performance and safety testing in Bel Air, Maryland. The team ensured all systems functioned correctly and helped prevent future plumbing issues with thorough inspections and repairs.

A plumber repaired a leaking toilet on the second floor of a shop in Bel Air, Maryland. The issue was a loose supply line, which was inspected for damage. After confirming it was in good condition, the plumber reconnected the line and tested the system to ensure proper function.

A plumber in Bel Air, Maryland inspected a hose bib for leaks, replaced a first-floor toilet fill valve, serviced the component isolation control system, and completed performance and safety tests to verify proper function.

A plumber in Aberdeen, Maryland flushed a water heater for 20 minutes to remove odor and ran hot water through all fixtures. They also cleared a jammed garbage disposal by removing debris and flushing the unit.

A plumber in Baltimore, Maryland diagnosed discolored water and knocking sounds during hot water use. The issue came from aging galvanized pipes, while the 2019 water heater remained in good condition with no faults. The inspection identified pipe replacement as the primary solution.

A plumber inspected a basement shower in Bel Air, Maryland. They identified a leak near the faucet plate and sealed it using 100% silicone caulk. The technician also tested the shower pan with water and confirmed no active leaks.

A plumber in Baltimore, Maryland cleared a clogged grease trap located beneath a rug by accessing it through a sealed plug. They used a screwdriver to open the blocked discharge line and tested the system by running water through the sinks multiple times. The plumber advised leaving the plug accessible for future maintenance.

A plumber in Bel Air, Maryland replaced an old toilet supply line with a new 12-inch braided supply line. They tested the installation to confirm proper water flow and secure connections.

A technician removed a leaking CPVC ball valve, completed water leak detection, and performed performance and safety testing in Bel Air, Maryland. The service ensured proper valve function and confirmed system integrity through targeted evaluations.

A plumber repaired a leaking cold shut-off valve and spray hose under a kitchen sink in Havre de Grace, Maryland. The service included tightening the spray hose and replacing a 12-inch straight compression valve. All components were tested to confirm proper operation.

A plumber cleared a master shower backup using a plunger and confirmed proper drainage by letting the water run without further issues in Bel Air, Maryland.

A technician in Bel Air, Maryland completed a 4-foot by 4-foot spot pipe repair to replace damaged blue piping with a pinhole leak. The job included water connection system renovation, leak detection, and system performance and safety testing.

Plumbers replaced a ¾" water service line in Baltimore, Maryland. They excavated the front yard, installed new poly piping from the meter to the house, and reconnected it to existing copper lines. The team backfilled the trench, mounded the soil, and tested the system for leaks and proper function.

A plumber in Bel Air, Maryland replaced a Moen cartridge, restored the plumbing system, and performed testing to check performance and safety. This service addressed wear issues and ensured the plumbing operated correctly.

A plumber in Bel Air, Maryland installed a customer-supplied universal pop-up rodball assembly and tested it for leaks. The system passed inspection. The plumber advised full assembly replacement if further problems develop.

A plumber in Baltimore, Maryland pulled and reset a toilet to clear a clogged drain line. They restored fixture water and sanitary seals, rejuvenated supply lines, and performed safety and performance tests to ensure proper function.

A plumber in Baltimore, Maryland tightened a loose toilet tank that was leaking down the back of the bowl when flushed. This repair stopped further water damage and restored proper toilet function.

Plumbers replaced a ¾-inch water service line in a front yard in Bel Air, Maryland. They excavated from the meter pigtail to the house, installed new poly pipe, connected it to existing copper, then backfilled and tested the system for leaks and proper flow.

A plumber in Bel Air, Maryland replaced a faulty 1-inch brass nipple at a well tee due to leaking threads. The technician installed a new 5x1 brass nipple and tested the connection to ensure it was leak-free.

The Plumber Guys inspected a leaking cast iron stack and riser pipes in a multi-unit building in Aberdeen, Maryland. They confirmed a vertical stack split after checking the water meter. Maintenance began opening access points in apartments to locate the exact leak source across the three floors.

A plumber unclogged a commercial sink and repaired a leaking trap near an ice machine. The technician ran water for several minutes to ensure proper drainage. Service took place in Bel Air, Maryland.

A plumber in Havre de Grace, Maryland removed a P-trap to locate a missing item, then reinstalled and tested it. The item was not found. The plumber also identified worn washers and a faulty pop-up waste that require replacement for proper sink function.

A plumber cleared a clogged main sewer line in Bel Air, Maryland. They ran three 45-foot cables to remove root blockages and identified a possible break where the main line meets the sewer. Afterward, they tested toilets and sinks to confirm proper drainage.

A plumber repaired a leaking garbage disposal by tightening the mounting ring to stop the drip. The system is currently dry and stable. Future leaks may require replacement. Service completed in Bel Air, Maryland.

A plumber in Bel Air, Maryland replaced a damaged CPVC water line that supplied a hose bib on a deck. The replacement matched the original material per the customer's request. The plumber completed a performance test after installation to verify proper function.

A plumber installed a Glacier Bay brushed nickel kitchen faucet with a pull-out spray in Bel Air, Maryland. The technician tested the faucet to ensure proper water flow and spray function. This service improved the kitchen’s plumbing functionality with a reliable and updated fixture replacement.

The Plumber Guys replaced a failing main water line from inside the house to the meter in Baltimore, Maryland. This followed a previous repair to a leaking ¾-inch galvanized pipe in the yard. The water heater at the property already met all required code upgrades.

A technician inspected an AC unit in Bel Air, Maryland, showing excess condensation and basement water pooling. They also checked the kitchen floor for water damage and confirmed no active leaks at the sink or refrigerator line. The evaluation focused on identifying moisture sources without immediate repair.

A plumber in Fallston, Maryland replaced an old saddle valve with a new quarter-turn SharkBite shut-off valve and adjusted the pressure-reducing valve. This service improved water control and system performance.

A plumber cleared a sewer line blockage in a basement bathroom in Baltimore, Maryland. They ran a cable 75 feet from the cleanout near the toilet to the main sewer. Afterward, they tested water flow by flushing the toilet and running water to confirm proper drainage.

Plumbers in Elkton, Maryland replaced a damaged cast iron pipe leaking through a wall. The team removed a laundry tub, opened the wall, and dug outside the home to access the pipe. After replacing the damaged section, they reinstalled the tub and sealed the wall from both sides to restore function.

A plumber inspected a broken main sewer line in a basement in Baltimore, Maryland. The line was leaking through the wall to the outside. Water flow remained unaffected during testing, but repairs are required to stop the leak and prevent further issues. The system was tested with showers and toilet flushes without any backup.

The Plumber Guys cleared a clogged toilet in the first-floor hall bathroom, restored the plumbing system, and completed performance and safety testing. This service took place in Havre de Grace, Maryland.

THE PLUMBER GUYS connected a customer-supplied washing machine to existing hot and cold water valves and drain in Aberdeen, Maryland. The team completed system restoration and performed safety and performance tests to confirm proper operation.

A plumber in Bel Air, Maryland removed an existing Kohler kitchen faucet and installed a customer-provided replacement. The service included full system restoration and performance and safety testing to ensure proper function.

A plumber in Bel Air, Maryland exposed a leaking shower faucet by cutting out wet drywall behind the unit. The inspection confirmed the leak source and led to a recommendation to replace the faulty shower faucet.

A plumber in Bel Air, Maryland inspected a basement with water intrusion during heavy rain. Both sump pumps worked properly. The plumber identified no internal plumbing issues and advised contacting a waterproofing company to evaluate the foundation for possible external water entry sources.

THE PLUMBER GUYS completed a system restoration in Edgewood, Maryland. The team removed damaged drain tile, installed 50 feet of new 4-inch tile for a sump pump and rain spout, and added a screen at the outlet. Services included excavation, backfilling, and full performance and safety testing of the updated system.

A plumber in Bel Air, Maryland removed an existing Insinkerator garbage disposal and installed a new ½ horsepower Wolverine Brass garbage disposal. The installation includes a five-year warranty covering parts and replacement.

A technician in Bel Air, Maryland corrected a misaligned float mount in a radon mitigation system. The mount had been bent during pipe installation, causing the pump to run continuously. The technician repositioned the mount, and the pump now operates correctly.

A plumbing technician in Baltimore, Maryland assessed a reported toilet leak and confirmed the issue originated from AC unit condensation entering through the air duct. The plumber advised contacting an HVAC professional to address the rooftop unit causing the moisture buildup.

The Plumber Guys replaced two basket strainers on a double-bowl kitchen sink, upgraded a water connection system, identified leaks, and conducted safety and performance tests in Bel Air, Maryland.

A plumber in Bel Air, Maryland replaced a leaking Moen Posi-Temp cartridge. The cartridge had been previously replaced but began dripping again. The customer approved a second replacement to fix the issue and stop the leak.

The Plumber Guys inspected a failed drain field in Bel Air, Maryland. The broken system caused the septic tank to function only as a holding tank, requiring pumping every six months. They also noted improper disposal of paper towels by employees, which may contribute to system strain.

A plumber in Baltimore, Maryland removed a leaking 12 copper tee located above a water heater that supplied an unused rear hose bib. The plumber eliminated the unused connection and rejoined the pipe with a coupling to restore water service. The system was tested to confirm proper function.

A plumber in Bel Air, Maryland removed and replaced a faulty tub diverter with a Wolverine Brass faucet in a basement bathroom. The service included water leak detection and performance and safety testing to confirm proper function.

A plumber in Bel Air, Maryland removed a loose toilet causing a sewer odor in a hall powder room. They installed a new wax ring, sealed the base with silicone, serviced the component isolation control system, and completed performance and safety testing.

A plumber removed a faulty toilet and upgraded the wastewater removal system in Bel Air, Maryland. The crew installed a new Gerber Maxwell comfort height toilet with a soft-closing seat, wax ring, and mounting bolts. The old unit was boxed for return, ensuring proper disposal and system function.

The Plumber Guys capped twelve hot and cold water lines inside a wall, restored the FRP panel with silicone, and reinstalled the ice bin. They completed this plumbing service after shutting down the building. Work took place in Newark, Delaware.

The Plumber Guys cleared a severe mainline blockage in Baltimore, Maryland. They ran five 75-foot cables from a basement cleanout to the street, removing root intrusions and resolving a persistent sewer backup. The main drain now flows properly, restoring full drainage throughout the home.

A plumber in Bel Air, Maryland replaced a faulty single-lever water valve with two boiler drain valves. The team upgraded the water connection system, identified a hidden leak, and completed performance and safety tests to confirm proper function.

A technician in Reisterstown, Maryland turned on a gas valve and lit a fireplace that was not starting. The team also completed a safety check to confirm there were no gas leaks in the system.

A plumber in Ellicott City, Maryland cleared a backed-up standup shower by running a cable through the line. The cable pulled back mud, indicating a break past the trap. Water now drains, but the damaged section needs camera inspection and permanent repair.

A plumber in Fallston, Maryland replaced a customer-supplied fill valve on a first-floor toilet, inspected a closet floor for water leaks, removed a pop-up waste from a second toilet, and completed a component isolation control system check with performance and safety testing.

A plumber replaced the can gasket on a Kohler toilet in the master bathroom. This service took place in Middle River, Maryland. The repair helped restore proper toilet function and prevent leaks.

A plumber in Aberdeen, Maryland turned off a refrigerator valve and disconnected the water line at the customer’s request. This service ensures safe appliance removal or relocation without risking leaks or water damage.

A plumber in Joppa, Maryland replaced a leaking saddle valve on a disconnected poly ice maker line. The plumber shut off water using an upstream valve to stop the drip affecting both the ice maker and a backyard hose bib, as requested by the customer.

A plumber replaced a faulty Moen Posi-Temp cartridge to stop a tub and shower faucet from dripping. This plumbing repair was completed in Bel Air, Maryland.

A technician inspected a noisy pressure-reducing valve (PRV) and tested system performance after recording water pressure at 82 psi. The valve may need replacement if noise increases. This plumbing service took place in Bel Air, Maryland.

The Plumber Guys repaired leaking copper fittings, renovated a residential water connection system, and performed leak detection in Bel Air, Maryland. The team also completed performance and safety testing to ensure system reliability.

A leaking water service line entering concrete was repaired in Middle River, Maryland. The plumber located the damaged section and completed the fix to restore proper water flow and prevent further water loss. This service helped secure the home’s plumbing and avoided structural damage from underground leaks.

A plumber in Havre de Grace, Maryland removed a toilet and cleared a clogged sewer line by running a 105-foot cable. They extracted paper towels and debris in two passes. After clearing the blockage, they reinstalled the toilet and confirmed proper drainage with multiple flushes.

A plumber in Elkton, Maryland removed a toilet, ran a 30-foot cable through the drain, and cleared a clog caused by paper towels. This service restored proper drainage and improved flow in the plumbing system.

A plumber in Bel Air, Maryland replaced both hot and cold boiler drains for a washing machine. The technician installed new quarter-turn valves, reconnected the appliance, and completed a successful test to confirm proper function.

A plumber in Bel Air, Maryland inspected a home for hidden water leaks after the customer reported an unusually high water bill. The technician found no visible leaks or running fixtures and confirmed the water meter was not moving, suggesting either high usage or a faulty meter.

A plumber in Bel Air, Maryland augered two clogged toilets after backups indicated a full septic tank. Despite the need for septic pumping, the homeowner requested immediate toilet service. A septic company is scheduled to pump the tank the following day to resolve the underlying issue.

A plumber cleared a main sewer line from a basement toilet in Baltimore, Maryland, running 100 feet to the street and verifying flow at the manhole. They reinstalled the toilet with a new wax ring. The line now flushes correctly.

A plumber in Bel Air, Maryland cleared two clogged vanity sinks by disconnecting the traps, snaking 20 feet through each line, removing the blockage, and reconnecting the traps. They ran water for several minutes in both sinks to confirm proper drainage.

A plumber in Bel Air, Maryland removed leaking copper fittings and installed new copper ProPress fittings. The system was tested to confirm proper function and ensure leak-free performance.

A plumber cleared a clogged kitchen sink drain line using a drain cable in Bel Air, Maryland. This service restored normal drainage and prevented future blockages.

The Plumber Guys identified a collapsed pipe beneath the floor in Elkton, Maryland. After a failed high-pressure attempt to clear the blockage, they determined the line required rerouting to restore proper flow and prevent further water intrusion through the flooring.

A plumber rebuilt two Delta vanity faucets using new seat and spring kits and cleared a blockage in the master vanity. This plumbing repair took place in Bel Air, Maryland.

The Plumber Guys replaced a standard hose bib with a frost-proof model and tested the system for safety and performance. They also completed a water leak detection service. This plumbing work took place in Bel Air, Maryland.

A plumber in Bel Air, Maryland removed a wall-hung toilet, accessed the wall, and repaired a hole in a 3-inch DWV copper stack. They replaced a two-foot section with Fernco fittings and capped the toilet inlet to stop backflow.

A plumber in Nottingham, Maryland replaced a non-functioning sewage pump that had failed to activate. The toilet was not backing up, but the wall-mounted pump needed replacement to restore proper wastewater flow.

A plumber in Elkton, Maryland installed a new Krowne sprayer faucet in a commercial dish area. The service included removing old wall mounts, installing a new wall mount, sealing unused wall holes with silicone, and testing the faucet for proper operation.

A plumber cleared a soft stoppage in a basement main line in Baltimore, Maryland. The team ran a cable approximately 35-40 feet from the clean-out, cleared the blockage, and tested drainage by filling and emptying the sink multiple times. Water flow returned to normal after service.

A plumber fixed a leak under a basement vanity in Bel Air, Maryland. The source was an unglued trap adapter. The plumber secured the adapter by gluing it and confirmed the repair by testing the connection.

A plumber in Glen Burnie, Maryland inspected bathroom drainage by running all sinks and the master tub for 15 minutes. They also flushed the toilet. All fixtures drained properly, confirming there were no clogs or drainage issues.

A plumber cleared a main line stoppage through a cleanout located in a parking lot. This service was completed in Bel Air, Maryland.

A technician repaired a leaking wall-hung toilet in a basement by removing it, cleaning the flange, replacing the gasket, and adjusting bolt length for a secure fit. The issue was resolved with a tight seal and no further leaks. Service took place in Bel Air, Maryland.

A technician installed a customer-supplied dishwasher and secured it to the countertop. The unit was tested to confirm proper operation. Service took place in Bel Air, Maryland.

A plumber in Baltimore, Maryland inspected household drains and confirmed there were no blockages or backups. The technician tested sinks and toilets for normal flow. The visit helped assess separate plumbing concerns reported by the homeowner for future attention.

The Plumber Guys completed trim installation on a vessel sink and wall-mount faucet in Bel Air, Maryland. They applied silicone sealant and tested all components to ensure proper function.

The Plumber Guys replaced a failed sump pump and battery backup system with a new Zoeller system in Bel Air, Maryland. This service restores proper basement drainage and helps prevent water damage during power outages.

A plumber in Bel Air, Maryland repaired a leaking ceiling caused by a loose toilet and broken flange. The repair included installing a new metal spacer kit, new bolts, and a wax ring to secure the toilet and stop the leak.

A plumber in Abingdon, Maryland installed a new water line for a refrigerator. The team opened a section of the basement ceiling, drilled through the floor, and ran a 14 PEX line to an existing 1/2-inch copper line. They added a copper tee and valve to connect the new refrigerator.

A technician replaced a faulty thermocouple that was shutting off the pilot light in a gas appliance. The new 18-inch thermocouple was installed, and the system was successfully tested after ignition. This service took place in Baltimore, Maryland.

A plumber in Baltimore, Maryland removed a vanity and repaired a broken 1 1/2-inch chrome drain line at the floor. The team tested the drain to confirm proper water flow and function after completing the repair.

A plumber in Delta, Pennsylvania removed an old vanity faucet and installed a customer-supplied Moen faucet. The technician tested the faucet to confirm proper water flow and function.

The Plumber Guys completed a mechanical control system rejuvenation, conducted water leak detection, and performed performance and safety testing in Bel Air, Maryland. These services improve plumbing efficiency and help prevent future system failures.

A plumber in Bel Air, Maryland replaced a damaged hose bib with a new 10-inch frost-free model and installed a shut-off valve to allow for winter isolation. The update helps prevent future pipe splits caused by trapped water during freezing temperatures.

Installed a customer-provided toilet in Bel Air, Maryland. Supplied bolts and shims to adjust for an uneven floor. Applied silicone at the base to improve stability. Completed full testing to confirm proper function.

A plumber in Bel Air, Maryland installed a customer-provided garbage disposal and kitchen faucet. The team also fixed multiple leaks in the drainage system that had been temporarily sealed with duct tape. The service ensured proper function of the new fixtures and restored the drainage lines to a leak-free condition.

A plumber replaced a frost-proof hose bib, checked for water leaks, and performed safety testing in Bel Air, Maryland. The service ensured the outdoor faucet worked correctly and identified potential plumbing issues through leak detection and functional assessment.

The Plumber Guys cleared a blocked floor sink by snaking 50 feet from the cleanout multiple times and flushing with hot water. They restored full drainage and completed fixture line rejuvenation, performance testing, and safety checks in Bel Air, Maryland.

The Plumber Guys repaired a loose toilet in the second-floor hall bathroom in Bel Air, Maryland. They replaced a broken toilet flange, secured the faceplate, and sealed the area to fix a leak caused by missing bolts and wax around the front of the unit.

A plumber cleared a clogged toilet using an auger, restoring proper flushing. Service took place in Bel Air, Maryland.

A technician removed the toilet tank from a second-floor in-law suite to replace a worn gasket in Elkton, Maryland. They serviced the component isolation control system and performed performance and safety testing to ensure full function.

A plumber cabled 100 feet from an indoor cleanout to the property line cleanout in Rising Sun, Maryland. The work cleared roots from the sewer line and included a performance test to confirm proper flow.

A plumber in Aberdeen, Maryland replaced a broken 3x2 PVC tee causing water leaks across multiple apartment units. The team located the damaged fitting behind a wall, removed it, and installed a new tee to stop water from flowing down the plumbing stack during laundry use in an upper floor unit.

A plumber unclogged a kitchen sink in Rising Sun, Maryland. The service included removing the trap, snaking the line three times to 75 feet, and clearing blockages caused by a plastic bag and grease. Water flow was fully restored after the final pass.

A plumber cleared a clogged toilet using an auger to restore full flushing function in Bel Air, Maryland.

A plumber in Aberdeen, Maryland, inspected a sump pump that was running frequently due to excess groundwater. The plumber confirmed the pump operated properly and the pit remained clear. No further action was needed.

The Plumber Guys installed a customer-provided Insinkerator Evolution garbage disposal in Bel Air, Maryland. They replaced the drain and trap and connected a new power cord to ensure proper function. This service involved fitting new components to match the updated disposal unit.

A plumber removed faulty nipples behind a backsplash and installed a new Krowne 8-inch spread faucet to fix a leak from a back mount faucet. This plumbing repair was completed in Havre de Grace, Maryland.

A plumber in Reisterstown, Maryland installed a new shower faucet and whole house water filter. The plumber sealed the faucet with silicone, added an access panel, and showed the homeowner how to replace the filter.

Plumbers replaced broken copper DWV piping with PVC, completed a drain leak detection, and performed system safety testing. This service took place in Bel Air, Maryland.

Plumbers replaced a Sloan urinal valve and connecting nipple. They removed a damaged toilet flange in the men's bathroom, installed a new wax ring and bolts, reset the toilet, and tested its function. Service completed in Bel Air, Maryland.

A plumber in Bel Air, Maryland replaced a broken check valve, pressure gauge, and boiler drain on a WaterWorker well tank tee. The system was tested to confirm proper performance and function.

The Plumber Guys replaced leaking stop and waste valves with full port ball valves in Bel Air, Maryland. They tested the new valves to ensure proper water flow and reliable operation. This service improved system functionality and prevented future leaks.

A technician in Elkton, Maryland removed an existing dishwasher and installed a customer-provided unit. The service included reconnecting the water supply, electrical wiring, and drain line. The technician tested the new dishwasher to confirm proper operation.

A plumber cleared a main sewer line in Baltimore, Maryland. The service involved running 75 feet through the sewer line, removing heavy root buildup, and unclogging the blockage to restore proper flow.

The Plumber Guys installed 50 feet of CPVC piping and added front and rear frost-proof hose bibs by drilling through exterior walls in Bel Air, Maryland. This setup supports reliable year-round outdoor water access and helps prevent pipe damage from freezing temperatures.

A plumber in Havre de Grace, Maryland installed a customer-supplied lever handle, cleared a toilet clog using an auger multiple times, and cleaned the jets to restore full flushing performance.

A plumber in Bel Air, Maryland adjusted a Bradford White water heater from warm to 120 degrees and repaired a leak on a three-quarter inch copper elbow using ProPress fittings. The technician refilled and tested the system to ensure proper performance.

A plumber in Perry Hall, Maryland inspected a faulty kitchen faucet sensor and battery pack. They disconnected the solenoid control box to allow manual use of the faucet. The customer plans to purchase a new faucet and schedule a professional installation.

A plumber in Chesapeake City, Maryland removed leaking valves, fittings, and pipe, then installed replacements to restore proper water flow. The service addressed faulty plumbing parts to prevent water damage and ensure reliable performance.

Technicians in Bel Air, Maryland excavated the front yard to access the curb valve and replaced the water service line. They installed new 1¼" copper Type L and polyethylene piping from the curb valve to the indoor connection. The team also performed leak detection, system renovation, and safety testing.

A plumber in Aberdeen, Maryland removed a damaged wall section, replaced a ¾-inch CPVC hot water valve with a brass SharkBite valve, and conducted water leak detection along with safety testing. The work improved the dishwasher sink's water connection system.

Technicians renovated a Bradford White water heater connection system in Rising Sun, Maryland. The team completed safety and code upgrades and performed performance and safety testing to confirm proper function.

A plumber in Bel Air, Maryland inspected a faucet and confirmed it was working correctly. The issue stemmed from the customer not turning the handle in the correct direction. No repair or replacement was necessary.

A technician in Baltimore, Maryland, relit the pilot light on a Rheem water heater after a sewage backup caused it to go out. The pilot remained stable after relighting, restoring normal function to the unit.

A plumber in Bel Air, Maryland replaced a damaged rear hose bib that froze and split inside the wall. They installed a new 10-inch frost-free hose bib and tested it for proper function.

A plumber in Bel Air, Maryland replaced a Moen Posi-Temp tub and shower faucet cartridge. The technician removed the old cartridge, installed a new one, applied caulk, and tested the system for leaks and proper operation.

A plumber installed a new bell-style basket strainer on the left side of a three-compartment sink and tested it for proper function. This sink upgrade was completed in Bel Air, Maryland.

A plumber removed and reinstalled a toilet using a new wax ring to improve sealing. The system was tested to confirm proper function. This service took place in Middle River, Maryland.

A plumber in Bel Air, Maryland replaced a leaking ice maker water line with a new poly line and secure connections. The technician tested the ice maker to confirm proper operation and water flow.

The Plumber Guys replaced a 30-gallon Rheem gas water heater with a new Rheem unit in Baltimore, Maryland. The job included code upgrades like installing an expansion tank, full port ball valve, and drain pan. They tested and purged the water system to ensure proper function.

A plumber in Elkton, Maryland removed a toilet, cleared a 30-foot main line blockage, and fixed a soft clog. After resetting the toilet, they used an auger to remove an obstruction. The drain line and toilet now flush properly and fully.

A plumber in Edgewood, Maryland cleared a clogged drain by running a 30-foot drain machine, removed the toilet, pulled the cable back, and reinstalled the toilet with a new wax ring and bolts to ensure a secure fit and proper flow.

A plumber replaced two broken toilet handles on a Gerber toilet. One handle was on the second-floor master bathroom, and the other was on the first-floor bathroom. Service was completed in Havre de Grace, Maryland.

A plumber in Bel Air, Maryland unclogged a urinal by removing it, clearing 30 feet of blocked line filled with grease, then resetting the urinal. They flushed the system multiple times and used hot water to ensure the drain flowed properly.

Plumbers cleared a clogged kitchen drain line in Perry Hall, Maryland. They removed grease buildup using a 25-foot drain snake and corrected venting issues by installing a Studor vent under the sink. The repair stopped gurgling sounds and odor when the washing machine drained.

The Plumber Guys completed a Platinum Service Plan membership annual inspection in Baltimore, Maryland. Technicians checked plumbing systems for wear, leaks, and performance issues to support ongoing functionality and early problem detection. Regular inspections help maintain system reliability across residential plumbing setups.

A plumber cleared a clogged kitchen sink drain, replaced a rusted garbage disposal, reconnected a disconnected P-trap, and serviced fixture lines in Rising Sun, Maryland. The team completed performance and safety testing to ensure proper system function.

A plumber repaired a leaking poly pipe on the hot water supply line for a bathroom sink in Elkton, Maryland. The service restored proper flow and prevented water damage, ensuring the sink operated efficiently. This repair focused on addressing a common residential plumbing issue with a quick and targeted solution.

The Plumber Guys removed a damaged brass plug, cleared a clogged main sewer line leading to the front yard cleanout, and completed a full main line rejuvenation. They also performed safety and performance tests. Service took place in Middle River, Maryland.

The Plumber Guys replaced a toilet flapper in a third-floor hallway bathroom. They serviced the component isolation control system and completed performance and safety testing. This plumbing work took place in Bel Air, Maryland.